6 Signs You Need to Call Hot Water Repair Immediately
August 20, 2018
Hot water heater is an essential appliance found in almost all homes. A water heater consists of the heating element and a storage tank. A hot water system is not only used in homes but in hospitals, hotels and other public establishments. They are a must have especially during winter months since they are used mostly during winters, not much attention is paid on its functioning rest of the year. This results in defaults that remain unattended until they are brought to use in winters.
 |
| Hot Water System |
The domestic water heaters work on the principle of thermodynamics. Usually, people face problems in selecting a hot water repair service in case of a default. There are numerous questions that crop up when faced with such a situation such as who to approach, if the general electrician will be able to handle it, if it is feasible to call service centres. Here we will list a few things that you must analyse before calling a hot water repair service.
Certain signs to know before you call a hot water repair expert
- Lack of water: If you find that there is no hot water even after the heater has been switched on for long, there can be several reasons for this. One reason could be the electrical circuit could have been broken due to which flow of current is hindered the other reason could be inefficiency of the water heater or it has attained its useful life. In fact, if there is flow of hard water, there are possibilities that certain unwanted elements have been accumulated and thus the heating element is taking more time to heat.
- Rumbling or unusual noise: Unwanted noise from the heater is also one of the reasons for its failure. If your heater makes rumbling, popping or creaking noise, it is time you should call a hot water repair. The noise is primarily because of the hard water. It is composed of several minerals which might have been deposited. If you regularly flush it out, it’s well and good, if not it can be a messy scene at the time of repair and cleaning.
- Leakage in the tank water: Corrosion beneath the tank can cause certain cracks and fractures that ultimately cause leakage. Before you call the hot water repair, you need to check out the leakage condition. If it is minor, it can be fixed temporarily through certain DIY hacks. However, if the leakage is severe, you need to call the experts at the earliest.
- Condensed liquid on the walls of the heaters: In many cases, drops of water dripping from the outer walls of the heater in a condensed form. This occurs due to accumulated contaminants in the tank. The hot water repair experts will clean it and change the heating element if it has been deteriorated due to constant heating.
- Smelly or coloured water: Sometimes there is a metallic smell the moment you switch on the water heater. This is an indication that the grit or flakes of the tank are deteriorating. If it is hard water supply, the accumulation of such dirt is obvious. Due to corrosion of certain parts, there will be a flow of contaminated water.
- Warm water instead of hot water: Due to constant heating and dirt, the heating element is mostly affected, and you might receive only warm or lukewarm water instead of hot water. This is the most probable and usual indication to call a hot water repair.
 |
| Hot Water System |
No matter how frequently you get it cleaned, regular servicing of a hot water heater is essential so that deteriorated parts can be replaced. Moreover, early servicing can even save you from future heavy expenses.
0 comments